Milwaukee Nailers & Staplers
Milwaukee cordless nailers and staplers, with no compressor, hose or gas cartridge. M18 FUEL covers 21 and 30 degree framing, coil roofing, duplex, 15 and 16 gauge finish (straight and angled) and 18 gauge brad nailers, plus narrow crown and fencing staplers. M12 adds a 23 gauge pin nailer, a compact 18 gauge brad nailer, a palm nailer and crown and cable staplers. Most are kept in stock at eBolt Supply in Springfield and Jacksonville, IL.
- Authorized Milwaukee dealer
- Free shipping on orders $199+
- Pickup in Springfield & Jacksonville
Only 6 left
Sale price $379.00Regular price $449.00
Milwaukee nailers and staplers by type
| Type | Model on eBolt (specs are for this model) | Gauge / fastener (Milwaukee) | Fastener length (Milwaukee) | Platform |
|---|---|---|---|---|
| Framing, 21 degree | 2744-20 M18 FUEL 21 Degree Framing Nailer | Full round head nails, 21 degree | Not listed | M18 FUEL |
| Framing, 30 degree | 2745-20 M18 FUEL 30 Degree Framing Nailer | Full round head nails, 30 degree | Not listed | M18 FUEL |
| Duplex (formwork) | 2844-20 M18 FUEL Duplex Nailer | Milwaukee collated duplex nails, 8D and 16D | 2-1/4" (8D), 3" (16D) | M18 FUEL |
| Coil roofing | 2909-20 M18 FUEL Coil Roofing Nailer | Coil roofing nails | Not listed | M18 FUEL |
| 15 gauge finish | 2839-20 M18 FUEL 15 Gauge Finish Nailer | 15 gauge DA style, 34 degree | 1-1/4" to 2-1/2" | M18 FUEL |
| 16 gauge finish, straight | 3020-20 M18 FUEL 16 Gauge Straight Finish Nailer | 16 gauge straight | 1" to 2-1/2" | M18 FUEL |
| 16 gauge finish, angled | 2841-20 M18 FUEL 16 Gauge Angled Finish Nailer | 16 gauge angled, 20 degree | 1-1/4" to 2-1/2" | M18 FUEL |
| 18 gauge brad | 2746-20 M18 FUEL 18 Gauge Brad Nailer | 18 gauge brad nails | Not listed | M18 FUEL |
| 18 gauge brad, compact | 2541-20 M12 FUEL 18 Gauge Compact Brad Nailer | 18 gauge brad nails | 5/8" to 1-1/2" | M12 FUEL |
| 23 gauge pin | 2540-20 M12 23 Gauge Pin Nailer | 23 gauge headless pin nails | 1/2" to 1-3/8" | M12 |
| Narrow crown stapler | 2749-20 M18 FUEL 18 Gauge 1/4" Narrow Crown Stapler | 18 gauge, 1/4" narrow crown staples | 3/8" to 1-1/2" | M18 FUEL |
| Crown stapler | 2447-20 M12 3/8" Crown Stapler | 3/8" flat crown staples | 1/4" to 9/16" | M12 |
| Cable stapler | 2448-20 M12 Cable Stapler | Milwaukee 1" insulated cable staples | 1" | M12 |
| Fencing stapler | 2843-20 M18 FUEL Utility Fencing Stapler | Milwaukee 9 gauge galvanized staples | 1-1/2", 1-3/4", 2" | M18 FUEL |
| Palm nailer | 2458-20 M12 Cordless Palm Nailer | Loose nails in a magnetic collet | 6D to 16D | M12 |
Finish, brad or pin nailer
Gauge is the nail's thickness: the lower the number, the thicker the nail. The 15 gauge 2839-20 and 16 gauge angled 2841-20 take 1-1/4" to 2-1/2" finish nails; the 16 gauge straight 3020-20 takes 1" to 2-1/2". For 18 gauge brads, pick the M18 FUEL 2746-20 or the compact M12 FUEL 2541-20 (5/8" to 1-1/2"). The M12 2540-20 drives 1/2" to 1-3/8" headless 23 gauge pins into delicate trim.
Framing and roofing nailers
The 21 degree 2744-20 and 30 degree 2745-20 sink full round head nails into engineered lumber at 3 nails per second. Match the angle to the nail strips you buy. The 2909-20 coil roofing nailer is built for small roofing jobs and repairs, fires up to 6 nails per second and has an attachable vinyl siding tip. The 2844-20 duplex nailer drives 8D and 16D duplex nails for concrete formwork, up to 4 per second.
Staplers and palm nailer
The M18 FUEL 2749-20 drives 1/4" narrow crown staples, 3/8" to 1-1/2", and the M12 2447-20 takes 3/8" crown staples, 1/4" to 9/16". The M12 2448-20 cable stapler fastens NM-B (14, 12 and 10 AWG) and low voltage cable. The M18 FUEL 2843-20 seats 9 gauge staples into fence posts and utility poles. The M12 2458-20 palm nailer holds 6D to 16D nails in a magnetic collet for spots a nail gun can't reach.
Questions
Which Milwaukee 16 gauge finish nailer should I get?
Pick by the nails you use. The 3020-20 takes straight 16 gauge nails, 1" to 2-1/2". The 2841-20 takes 20 degree angled 16 gauge nails, 1-1/4" to 2-1/2". Both are M18 FUEL, fire 3 nails per second and hold 110 nails. On an M18 CP2.0 battery Milwaukee rates the 3020-20 at up to 700 nails per charge and the 2841-20 at up to 800.
Do Milwaukee cordless nailers need a compressor or gas?
No. The M18 FUEL nailers drive each nail with a sealed nitrogen air spring and an M18 REDLITHIUM battery, so there's no compressor, hose or gas cartridge. The M12 pin nailer, brad nailer and staplers run on M12 batteries.
Which nails and staples fit?
Match the gauge, angle and length in the table above. Three tools need Milwaukee's own fasteners: the 2844-20 duplex nailer (collated duplex nails MDP8D-2000 and MDP16D-2000), the 2843-20 fencing stapler (9 gauge galvanized staples in 1-1/2", 1-3/4" and 2") and the 2448-20 cable stapler (1" insulated staples). eBolt carries all of them.
What's in the nailer kits?
The 15 gauge 2839-21CT and 16 gauge angled 2841-21CT kits have the nailer, an M18 CP2.0 battery, an M18 and M12 multi-voltage charger and a contractor bag. The duplex 2844-21 kit has an M18 XC5.0 battery, the multi-voltage charger and a contractor bag. The M12 2540-21 pin nailer kit has an M12 CP1.5 battery, a charger and a contractor bag.

